Avoid expensive emergency repairs and be sure that your furnace and central air conditioning system are running safely and at peak efficiency.
- Furnace SmartGuard Plan—yearly furnace performance inspection and tune-up for only $9.95 per month.
- Air Conditioning SmartGuard Plan—yearly central air conditioning system performance inspection and tune-up for only $9.95 per month.
- The SmartGuard Combo Plan covers the yearly performance inspection and tune-up for both your furnace and central air conditioning system for only $14.95 per month. (A 24% savings!)
SmartGuard gives you a proactive inspection for less than the cost of a service call for a broken system! And we'll even add the low monthly fee to your DTE Energy bill, so you don't have to remember to make another payment.
What's Covered in the SmartGuard Performance Inspection:
| Furnace SmartGuard Plan | Air Conditioning SmartGuard Plan |
|---|---|
| Test for carbon monoxide | Check compressor operation |
| Check thermostat | Check thermostat |
| Lubricate fan motor, bearing & pump | Test blower operation |
| Test blower operation | Inspect fan belt |
| Check furnace safety controls | Adjust humidifier damper position |
| Check ignition systems | Inspect condenser fan blades |
| Check venting system & controls | Check drain condition |
| Clean and calibrate burners | Check condensate pump operation |
| Check pilot safety system | Inspect evaporator coil |
| Inspect heat exchanger | Check contactor |
| Check belt tension & condition | Check refrigerant charge |
| Check for gas leaks | Check capacitor |
| Advise on filter and maintenance | Inspect condenser coil |
| Check humidifier | Inspect filter system |
| Check gas pressure/input | Lubricate fan and bearings |
| Inspect condition of venting/vent conditions | Clean condenser housing |
| Check combustion/ventilation air | Apply protective coating |
| Clean pilot burner | Check coil temperature drop |
| Check water level on boilers, adjust to proper level as needed | Clean condenser coil |
| Inspect chimney and flue pipe for proper draft conditions | Clean drain line |
| Clean burner, inspect filter and advise customer of proper cleaning | Check amp draw |
For a list of terms and conditions for SmartGuard service plans, click here.